Energía Solar Fotovoltaica
Llámanos - 968 78 74 80

Aluminum structure kit for 2 vertical panels 30º. On metal sheet cover Sunfer 11V2_30

162,97 iva inc.

  • Made by aluminum EN AW 6005A T6
  • Inclination of 15º or 30º
  • Module layout: Vertical
  • For metal sheet covers
  • anchorage to straps
  • Dimensions: 195,0 x 20,0 x 12,0 cm
  • Weight: 13,1kg

Description

Aluminum structure kit for 2 vertical panels at 15 or 30 degrees on the metallic sheet cover Sunfer 11V2_30

The aluminum structure kit for 2 vertical panels at 15º or 30º on a sheet metal roof by Sunfer 11V2_30 is made of high-strength EN AW 6005A T6 aluminium, specifically designed to be placed on flat sheet metal roofs or other types of metal substructures.

This structure has to be anchouraged to straps above which is located the cover. It is a pre-assembled support with a standard inclination that can be adjusted to 15º or 30º to place the panels in a vertical position.

It admits modules with a maximum size of 2279 x 1150 mm and a thickness between 30 and 45 mm, it is covered by a wide range of models and manufacturers, such as the JA Solar panels that you can find on our website.

This Sunfer´s designs to put up with anout more than 150 k , that in Beaufort scale a is same as a hurricane, capable to fly the buildings. This warranties that it can be installed on the major amount of covers without a danger of suffering ny injures for being exposed to a wind.

To warranty the resistance to the maximum speed of design there have to be used the correct anchors and the indicated ballast by each brand

It includes stainless steel screws A2-70 for its mounting It doesn’t include the screws to anchorage it to the surface.

Data sheet of the aluminum structure kit for 2 vertical panels at 15 or 30 degrees. Sunfer 11V2_30

See a data sheet of the aluminum structure kit for 2 vertical panels at 15 or 30 degrees. On metal sheet cover Sunfer 11V2_30

Additional information

Weight 13 kg
Dimensions 195 × 20 × 12 cm
×

Cart