Energía Solar Fotovoltaica
Llámanos - 968 78 74 80

Aluminum structure kit for 3 vertical panels 30º. On the floor. Sunfer 09V3_30

195,79 iva inc.

  • Made by aluminum EN AW 6005A T6
  • Inclination of 15º or 30º
  • Module layout: Vertical
  • For flat concrete roofs
  • Measurements: 195,0 x 20,0 x 22,0 cm
  • Weight: 15.7kg

Description

Aluminum structure kit for 3 vertical panels. 30º on the floor . Sunfer 09V3_30

Aluminum structure kit for 3 vertical panels – 30º on the floor Sunfer 09V3_30 is made of high resistance EN AW 6005A T6 aluminium, specifically designed to be placed on flat roofs or other types of concrete substructures.

It is a pre-assembled support with a standard inclination that can be regulated at 15º or 30º to place panels in vertical position. It admits modules with a maximum size of 2279 x 1150 mm and a thickness between 30 and 45 mm, it is covered by a wide range of models and manufacturers, such as the Victron  panels that you can find on our website.

This Sunfer´s designs to put up with anout more than 150 k , that in Beaufort scale a is same as a hurricane, capable to fly the buildings.

This warranties that it can be installed on the major amount of covers without a danger of suffering ny injures for being exposed to a wind. To warranty the resistance to the maximum speed of design there have to be used the correct anchors and the indicated ballast by each brand

It includes stainless steel screws A2-70 for its mounting It doesn’t include the screws to anchorage it to the surface.

Data sheet of the aluminum structure kit for 3 vertical panels – 30º on the floor Sunfer 09V3_30

See data sheet of the aluminum structure kit for 3 vertical panels – 30º on the floor Sunfer 09V3_30

See assembly diagrams of the aluminum structure for 3 vertical panels. 30º. On the floor.

Additional information

Weight 16 kg
Dimensions 195 × 20 × 22 cm
×

Cart