Energía Solar Fotovoltaica
Llámanos - 968 78 74 80

Victron BlueSolar MPPT 100/30 regulator – SCC020030200

  • Battery tension; 12/24 V Auto Select
  • Nominal current charge ; 30 A
  • Maximum power PV, 12V; 440 W
  • Maximum power PV, 24V; 880 W

Description

Victron BlueSolar MPPT 100/30 regulator by Victron Energy

With the Victron BlueSolar MPPT 100/30 controller you can enjoy a charging current of up to 30 Amps and a PV voltage of up to 100 volts. The Victron BlueSolar 100/30 MPPT charge controller can charge a battery with a lower rated voltage from PV panels with a higher rated voltage of at least +5V. The BlueSolar controller automatically adjusts the nominal battery voltage to 12.24V once connected to the controller.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially under cloudy skies, when the light intensity changes continuously, a
ultra-fast MPPT controller will improve energy recollection by up to 30%, compared
to the nPWM charger controllers and up to 10% comparing it to the MPPT, slower
controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
In case of partial cloudiness, two or more maximum power points (MPP) may occur in the
tension charge curve Conventional MPPTs usually select a local MPP, which is not necessarily the
optimum MPP. SmartSolar’s innovative algorithm will always maximize energy harvest by selecting the
optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm
A fully programmable charging algorithm (see the software page of our web
site) and 8 algorithms of already programmed charge, that can be chosen by a rotary switch.
(for more information check the manual)

Extensive electronic protection
Over temperature protection and power reduction in case of high temperature. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature

Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect
function.

VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other
devices.

×

Cart