Victron Multiplus II 24/3000VA 24V 70+32A inverter
Features of the Victron Multiplus II 24/3000VA 24V 70+32A inverter
The Victron Multiplus II 24/3000VA 24V 70+32A Inverter is an advanced device for our photovoltaic installation that makes it easier for us to have a hybrid self-consumption system with storage and full operating guarantees.
Like the entire Victron MultiPlus range, this MultiPlus II family is a multifunctional inverter with charger that has numerous electrical certifications from a large number of countries that enable it to be used as an energy storage system connected to the electricity grid (ESS).
El modelo MultiPlus II, anteriormente denominado MultiGrid II, incorpora también protección antiisla y las funcionalidades de Victron PowerControl y PowerAssist.
Victron Multiplus II 24/3000VA 24V 70+32A solar charger inverter is a warranty of reliability and stability, thanks to the advanced design of its power moment.
Victron Multiplus II 24/3000VA 24V 70+32A inverter offers until 3000VA of output power from the inverter, but thanks to the PowerAssist function, can supply more output voltage adding the energy from the altering current input, and also from the batteries to not to overload the input of the external network. Work with 24V and show and internal charger of 70A.
Thanks to its function as UPS, it is capable of offering uninterrupted power output, since switching is very fast so that critical consumption is not affected. Like the rest of the MultiPlus family, it has a lot of capacity to amplify thanks to its parallel work with a maximum of 6 units.
It is also possible to use it on a three-phase network by installing a unit for each phase, to which we can also add parallel work within the phases themselves.
Functionality of the Victron Multiplus II 24/3000VA 24V 70+32A inverter
The MultiPlus II inverter can operate under any of the most common energy storage topologies. Optionally, a current sensor is offered to be able to limit the alternating current input according to our needs, since the transfer and charging power of the MultiPlus II may be excessive for the available current.
The most common uses for this type of inverter are:
MultiPlus II is used in installations like SAI with critic batteries.
In this case, the charger inverter can have the usual loads, powered by the conventional electrical network and have an energy storage system (battery) that will power the critical loads if the network fails or is unstable.
It will be considered if there any limitations are need to be applied to the AC input for a safety by using the PowerControl and PowerAssist functions.
Connected to the network and photovoltaic through the MPPT regulator.
In this case, the photovoltaic inverter will use the information provided by the toroidal current sensor and thus optimize self-consumption, converting the energy into alternating current and using it directly for consumption.
Thanks to this we can choose whether or not to pour the excess solar production into the electricity grid.
The batteries are recharged with solar panels and the consumption can be divided among the critics; always fed even with cuts in the supply and the normal ones, which can also be fed with the energy produced by the panels.
Victron Multiplus II Inverter Monitoring 24/3000VA 24V 70+32A
It is very recommended to put a maximum control of the solar installation, including a Panel Color Control by Victron, because we can program it directly from itself, charge parameters of the functioning so we can supervise its efficiency.
All the members will be on the control screen and we will have all the detailed information of the productions, consumption, storage, etc
Thanks to including the Victron ColorControl Panel, we will have access to the VRM portal provided by the brand where we will have access to the monitoring and configuration of the system from any terminal with internet access. VRM gives us an option to send alarms according to how we program the functioning of the system.
Compatibility of the Victron Multiplus II 24/3000VA 24V 70+32A inverter
MultiPlus II can work perfectly with almost any battery on the market with 24V. Its great flexibility and adaptability allows it to be configured to charge a lead-acid battery of any technology, whether sealed or open OPzS type. Victron regularly updates its software to ensure compatibility with the vast majority of lithium battery brands on the market. The future warranty.
If an external charge regulator topology is used to charge batteries or for direct self-consumption, it is recommended to use a Victron brand MPPT model. This way we have on the ColorControl panel any detail of photovoltaic system.
If it is used a photovoltaic inverter like a solar generator, it is advised to use a product by Fronius, however it is important to save compatibility with other well known brands as Kostal.
In the ColorControl and in the VRM portal, we can also supervise the production of the photovoltaic inverter Also there are compatibilities with more brands like Schneider, you can search for all the compatible brands on the Victron web site, where they update them frequently.