Energía Solar Fotovoltaica
Llámanos - 968 78 74 80

Victron Phoenix 24V 5000VA Smart inverter – PIN242500000

1.876,27 iva inc.

  • Voltage: 24V
  • Continuous output power: 5000VA
  • Power peak: 10000W
  • Weight: 29kg
  • Dimensions: 595 x 295 x 160 mm

 

Description

Victron Phoenix 24V 5000VA Smart inverter

Victron Phoenix 24V 5000VA Smart is an efficient and ralizable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.

It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.

Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.

Bluetooth is built-in, and makes setting up your high power inverter easier than ever before. Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect

Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.

• Low battery voltage alarm
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage: 210 – 245V
• Frequency: 50 Hz o 60 Hz
• ECO mode on/off and ECO mode sense level
• Alarm relay

Tracking:

• In- and output voltage, load and alarms

VE.Direct communication port

The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. . Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable).
If the load exceeds the preset level, the inverter will remain on

Remote on/off

A remote on/off switch or relay contact can be connected to a two pole connector.
Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

Data sheet of the Victron Phoenix 24V 5000VA Smart inverter

See data sheet of the Victron Phoenix 12V / 5000VA Smart inverter

Additional information

Weight 29 kg
Dimensions 60 × 30 × 20 cm
×

Cart