Energía Solar Fotovoltaica
Llámanos - 968 78 74 80

Victron SmartSolar MPPT 150/85 -Tr VE.Can regulator – SCC115085411

670,10 iva inc.

  • Battery tension; 12/24/48 V Auto Select
  • Nominal current charge; 85 A
  • Maximum power PV, 12V; 1200 W
  • Maximum power PV, 24V; 2400 W
  • Maximum power PV, 36V; 3600 W
  • Maximum power PV, 48V; 4900 W

Description

Victron SmartSolar MPPT 150/85 Tr regulator from Victron Energy

With the Victron SmartSolar MPPT 150/85 regulator you can enjoy a charging current of up to 70 Amps and a photovoltaic voltage of up to 250 volts. The Victron SmartSolar 150/85-Tr MPPT charge controller can charge a battery with a lower rated voltage from PV panels with a higher rated voltage of at least +5V. The SmartSolar controller automatically adjusts the nominal battery voltage to 12, 24, 36, or 48 V once connected to the regulator.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

VE.Can: the solution of a multiple controller
Can be synchronized till 25 units with VE.Can and to 10 units with Bluetooth.

VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices

Remote on-off
To connect to the VE.BUS BMS, for example.

Remote configuring
Can be programmed to trip on an alarm, or other events.

Optional: LCD screen that can be connected Smart Solar
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Additional information

Weight 5 kg
Dimensions 22 × 30 × 11 cm
×

Cart