Energía Solar Fotovoltaica
Llámanos - 968 78 74 80

Victron SmartSolar MPPT 75/10 regulator – SCC075010060R

  • Includes Bluetooth for managing through the APP
  • Battery tension; 12/24 V Auto Select
  • Nominal current charge; 10 A
  • Maximum power PV, 12V; 145 W
  • Maximum power PV, 24V; 290 W


Victron SmartSolar MPPT 75/10 regulator from Victron Energy

With the Victron SmartSolar MPPT 75/10 controller you can enjoy a charging current of up to 10 Amps and a PV voltage of up to 75 volts. The Victron SmartSolar 75/10 MPPT charge controller can charge a battery with a lower rated voltage from PV panels with a higher rated voltage of at least +5V. The SmartSolar controller will adjust perfectly to the nominal tension of the battery a 12, 24 V once it is connected to the regulator.

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details)

Extensive electronic protection
Over temperature protection and power reduction in case of high temperature. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature

Optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense sensor or BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more charge controllers

Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

For a wired data connection to a Color Control GX, other GX products, PC or other devices